Once a week, clean the surface in circular motions using a damp cloth. If you use a cleaner, apply it first to the cloth and then clean the surface. To clean glass elements, use chemicals products specifically adapted for glass and mirrors cleaning.
Clean regularly the entire surface with a microfibre cloth soaked in the cleaner or water. Let it dry. Do not apply the cleaner directly on the surface.
Do not use abrasive or polishing products and rough sponges
Before cleaning, the upholstered element should be cleaned using an electrostatic dust brush or a hoover fitted with a soft brush.
Do not use solvents, chemical thinners or pastes containing abrasive substances to remove dirt and stains from the fabric.
Any liquids spilt on the upholstery must be removed immediately from the surface using a cotton or paper cloth, so as not to spread the liquid too thinly over the surface.
Once a week, vacuum the entire floor surface. For heavy soiling, use a neutral cleaner. Use products intended for floor coverings.
Before using the cleaner, test it on a small invisible spot.
Once a week, clean the surface from top to bottom with a damp microfibre cloth. The use of solvent-based products may damage the surface.
Do not use products containing abrasive agents, such as powders, pastes and cream cleaners which can scratch the surface.
Do not use rough sponges.
Once a week, clean the surface from top to bottom with a damp microfibre cloth that does not leave fibres and prevent streaks. If any liquid is spilled on the furniture, wipe it immediately
before it dries. Do not use products containing abrasive agents, such as powders, pastes and cream cleaners which can scratch the surface.
Do not use rough sponges.
Clean everyday the handles inside and outside the booth with a damp microfibre cloth. After cleaning, wipe the handles dry.
Once every six months, clean the fan with a vacuum cleaner equipped with a flexible nozzle.
Do not insert the vacuum hose between the fan blades.
Do not use solvent-based detergents. Do not use preparations containing abrasive agents such as powders, pastes or cleaning milks which may scratch the surface. Do not use rough sponges.
Once a week, clean the surfaces from top to bottom with a damp microfibre cloth. The use of solvent-based substances may damage the surface. Do not use preparations containing abrasive agents such as powders, pastes and cleaning milks, which can scratch the surface.
Do not use aggressive cleaning products.
Once every six months, clean the fan using a hoover with a soft nozzle.
To ensure the highest acoustic parameters, the ventilation was designed in a directional way to push excess polluted air out of the pod. However, it is recommended to open the door completely from time to time. For this purpose recommended time for continuous use of Hushoffice booths is 1-2 hrs. When the use time exceeds 1 hour, information about the recommended 5-minute break appears on the display screen of hushAssistant steering module.